Mr.PlanB Logo

    Newsletter

    Subscribe our newsletter

    Get new infrastructure guides, comparison reports, and migration notes in your inbox.

    Infrastructure notes, guides, and new tools. Unsubscribe anytime.

    Back to Blog
    TrueNAS
    Proxmox
    NVMe over TCP
    Homelab

    TrueNAS 25.10.8: Who Should Update First and What to Check

    November 17, 2026
    6 min read

    Homelabs exporting NVMe over TCP or NFS storage from TrueNAS to Proxmox hosts should update to TrueNAS 25.10.8 first. Released on 5 November 2026 per the TrueNAS 25.10 version notes, this maintenance update patches an NVMe over TCP transfer bug that risked silent data loss, fixes multiple NFS server security flaws, and updates the Linux kernel. After updating, check rsync tasks, GPU apps, and SMB settings.

    Who should update to TrueNAS 25.10.8 first

    If your TrueNAS box serves block or file storage to Proxmox VE nodes over NVMe over TCP or NFS, this release belongs at the front of your maintenance queue. The highest-risk bug in earlier builds affects Linux hosts connected to a TrueNAS NVMe over TCP target.

    According to the TrueNAS 25.10 version notes for ticket NAS-144298, the NVMe over TCP target previously told connected hosts that it had no limit on transfer size. In practice, the target rejected any single transfer larger than 4 MiB. Linux hosts that sent larger transfers received I/O errors, and the version notes warn that those errors could silently lose data on some file systems such as ext4. TrueNAS 25.10.8 fixes this by reporting a transfer size limit that hosts follow.

    If you are running NVMe over TCP storage with Proxmox or evaluating a TrueNAS Proxmox storage plugin, updating removes that risk for Linux hosts sending large transfers.

    Homelabs relying on NFS exports to Proxmox should also prioritize TrueNAS 25.10.8. Per the TrueNAS 25.10 version notes, the kernel update in 25.10.8 patches seven use-after-free errors in the NFS server, a use-after-free error in the NFS lock manager, and memory errors in Kerberos-protected NFS message processing. If you have been troubleshooting homelab NFS mount issues, getting these server-side kernel fixes in place is a sensible baseline before chasing client mount options.

    Kernel and security fixes in TrueNAS 25.10.8

    Per the TrueNAS 25.10 version notes (last modified 6 November 2026), TrueNAS 25.10.8 (Goldeye) updates the Linux kernel to 6.12 LTS v6.12.113 under tickets NAS-143852 and NAS-144791. That kernel bump addresses more than 1,600 upstream CVEs, including several critical and high-severity issues in storage and networking components that TrueNAS uses.

    ComponentFix summaryTracking IDs
    Linux kernelUpdates to 6.12 LTS v6.12.113, over 1,600 CVEsNAS-143852, NAS-144791
    NFS serverSeven use-after-free errors when freeing client stateCVE-2026-89662, CVE-2026-89658, CVE-2026-89659, CVE-2026-89660, CVE-2026-90036, CVE-2026-90037, CVE-2026-89708
    NFS lock managerUse-after-free errorCVE-2026-89485
    Kerberos NFSMemory errors on malformed Kerberos messagesCVE-2026-89551, CVE-2026-89542
    NVMe over TCPMissing length checks on host data and NVMe-oF auth heap overflowCVE-2026-89482, CVE-2026-98725
    Network stackIP fragments, BIG TCP, guest IPv4 checksum offset, IPv6 and TCP use-after-freeCVE-2026-74662, CVE-2026-80725, CVE-2026-99999, CVE-2025-40158, CVE-2026-98432
    io_uringSubmission queue task use-after-freeCVE-2026-98858
    Dataset unlock jobsRedacts plain-text passphrases in internal job argumentsNAS-144783

    Beyond the storage protocols, the network stack fixes in v6.12.113 matter if your TrueNAS server shares a host or handles virtualized traffic. As detailed in the TrueNAS 25.10 version notes, the kernel patch set resolves an IPv4 checksum offset issue (CVE-2026-99999) that a guest could use to corrupt host memory, along with errors in IP fragment queuing (CVE-2026-74662), BIG TCP aggregation (CVE-2026-80725), an IPv6 use-after-free error (CVE-2025-40158), an IPv4 TCP use-after-free error (CVE-2026-98432), and a submission queue task use-after-free in io_uring (CVE-2026-98858).

    TrueNAS 25.10.8 also fixes a passphrase exposure on encrypted datasets. Per the TrueNAS 25.10 version notes for NAS-144783, when a passphrase-encrypted dataset was opened from the web interface, the passphrase was stored unredacted in the arguments of an internal zfs.dataset.bulk_process job. TrueNAS 25.10.8 treats those arguments as secret so the passphrase no longer appears in plain text in job details.

    Pre-update steps from TrueNAS 25.10.7

    If you are already running TrueNAS 25.10.7, the TrueNAS 25.10.8 release notes list no pre-update actions.

    Before applying any point release, you can check the TrueNAS Software Status page for version recommendations. We covered the earlier TrueNAS 25.10.2 update if you are still catching up from older 25.10 builds.

    What to check after updating

    Once TrueNAS 25.10.8 boots back up, a few targeted checks will confirm that the remaining fixes in this release apply cleanly to your configuration.

    Test rsync tasks with quoted extra options

    A regression in TrueNAS 25.10.7 broke rsync tasks whenever the Extra options field contained quoted values. Per the TrueNAS 25.10 version notes for NAS-143382, TrueNAS 25.10.7 treated quoted options literally, so an option such as --rsync-path="sudo rsync" was interpreted as a single command named sudo rsync and the task failed. TrueNAS 25.10.8 restores the behavior from 25.10.6. After updating, run a manual test on any rsync task that uses quoted flags to verify it completes without errors.

    Re-save apps after an NVIDIA GPU swap

    If you replaced an NVIDIA GPU with a different card in the same PCIe slot, apps configured to use that GPU kept the old card identifier and failed to start. According to the TrueNAS 25.10 version notes for NAS-142006, TrueNAS 25.10.8 updates the stored identifier to match the currently installed card. The update does not apply that change to existing app definitions automatically, so you must edit and save the app, or redeploy it, for the new identifier to take effect.

    Re-save SMB service settings if directory services are enabled

    In earlier 25.10 builds, an error in the check for NetBIOS alias changes prevented saving any updates on the SMB service screen when directory services were enabled, throwing too many values to unpack (expected 2). Per the TrueNAS 25.10 version notes for NAS-143595, SMB service settings now save as expected. If you had pending SMB configuration changes that previously failed to save, apply and save them again after the reboot.

    Verify Backblaze B2 Cloud Sync and TrueNAS Connect certificates

    Two smaller quality-of-life fixes in TrueNAS 25.10.8 require no manual steps unless you hit them earlier. Under NAS-144662, TrueNAS now strips leading and trailing spaces from Backblaze B2 credentials before verifying or running Cloud Sync tasks, preventing invalid authorization token errors caused by stray spaces copied with a key. Under NAS-144031, the request timeout between TrueNAS and TrueNAS Connect increases from 15 seconds to 55 seconds, which prevents certificate generation from failing when the certificate authority responds slowly.

    Summary of the TrueNAS 25.10.8 update

    TrueNAS 25.10.8 is a focused maintenance release for the 25.10 Goldeye series that pairs Linux kernel 6.12.113 security patches with practical fixes for NVMe over TCP, NFS, dataset passphrases, SMB, rsync, Cloud Sync, TrueNAS Connect, and GPU apps. Homelabs serving NVMe over TCP or NFS storage to Proxmox hosts gain the most by updating promptly. Afterwards, check rsync tasks, GPU app configs and SMB settings.

    Frequently Asked Questions

    What does TrueNAS 25.10.8 fix for NVMe over TCP?

    Per the TrueNAS 25.10 version notes, TrueNAS 25.10.8 fixes NAS-144298, where the NVMe over TCP target reported no transfer size limit but rejected transfers over 4 MiB, causing I/O errors that could silently lose data on file systems such as ext4. It also patches CVE-2026-89482 and CVE-2026-98725 in the kernel.

    Do I need any pre-update steps before installing TrueNAS 25.10.8?

    No. The TrueNAS 25.10.8 release notes state that no pre-update actions are required when updating from TrueNAS 25.10.7.

    How do I fix an app after replacing an NVIDIA GPU in TrueNAS 25.10.8?

    According to the TrueNAS 25.10 version notes for NAS-142006, TrueNAS 25.10.8 updates the stored GPU identifier to match the installed card, and you need to edit and save the app, or redeploy it, to apply the updated identifier.

    Does TrueNAS 25.10.8 fix rsync tasks that broke in 25.10.7?

    Yes. Per the TrueNAS 25.10 version notes for NAS-143382, TrueNAS 25.10.8 restores the 25.10.6 handling of quoted values in the Extra options field, fixing tasks such as those using --rsync-path="sudo rsync".

    What Linux kernel version is in TrueNAS 25.10.8?

    The TrueNAS 25.10 version notes state that TrueNAS 25.10.8 updates the Linux kernel to 6.12 LTS v6.12.113, addressing more than 1,600 upstream CVEs.