
Black Friday Homelab Deals 2026: What's Actually Worth Buying for a Proxmox Lab
Affiliate disclosure: This article contains affiliate links. If you buy through them, we may earn a small commission at no extra cost to you. We only recommend hardware and tools we have used or researched in depth, and commissions never influence our verdicts.
As an Amazon Associate I earn from qualifying purchases. The links below carry my tag. Prices change by the hour during Black Friday week, so I don't print them here: check today's deal on each page.
Black Friday homelab deals for a Proxmox lab are worth it when they fix the part that breaks first: SSD wear under ZFS, a power cut with no clean shutdown, or a node that idles at 30 watts all year. These nine picks cover a mini PC, a backup NAS, hard drives, SSDs, a UPS, a 2.5GbE switch and a watt meter, with who each one suits.
I picked them from what this site and the Mr PlanB channel have already covered: the Proxmox mini PC idle power table, the SSD wear and ZFS videos, the UPS shutdown work and the storage layout video. Where I quote a number, it comes from the maker's datasheet or a named review. I have not run every one of these boxes on my own bench, and I say so where it matters.
Amazon runs its Black Friday Week and Cyber Monday sale from 19 to 30 November 2026, so the deal on any of these can change before you click.
A first node: the Beelink EQ14 mini PC
It suits a first Proxmox node, a router or firewall VM host, or a third box to give a two-node cluster its quorum vote. The EQ14 has an Intel N150, 16GB of DDR4, a 500GB SSD, two M.2 slots and two 2.5GbE ports, according to the Amazon listing. Two ports matter on Proxmox: one for the management and VM bridge, one for storage or a WAN link. The video on dual Ethernet on Proxmox and NAS boxes walks through what a second port is really good for.
On power, the N150 is the successor to the N100. In the idle power table, CNX Software measured the N100 Beelink EQ12 at 12.1 to 14.3W at the wall, and most 1-liter PCs land between 9 and 16W. The EQ14 is not in that table, so measure your own unit with the watt meter at the end of this list. Two things to check before you buy: the N150 reads RAM in a single channel, and Beelink sells the EQ14 with both 1GbE and 2.5GbE ports, so make sure the listing says dual 2.5G LAN. Beelink EQ14 on Amazon (check today's deal).
A box for backups: the UGREEN DXP2800
It suits anyone whose backups still live on the same Proxmox host they protect. Backups on the same box as the VMs are one disk failure away from being no backups at all. A small separate NAS gives Proxmox an NFS or SMB target for vzdump, or a place for a Proxmox Backup Server datastore. The DXP2800 has an Intel N100, 8GB of DDR5, two drive bays, two M.2 NVMe slots and 2.5GbE, per the listing. It ships diskless, so budget for the drives below.
I haven't benchmarked this unit. I picked it for the spec sheet: the same N100 class of CPU that idles low in the table above, 2.5GbE to match the switch, and enough slots for a mirrored pair of hard drives. If you would rather run PBS itself on bare metal, the same logic applies, as the video on why PBS should not run in a VM explains. UGREEN DXP2800 on Amazon (check today's deal).
Hard drives for the mirror: WD Red Plus or IronWolf
It suits bulk storage, backups and media, in a mirrored pair. The Proxmox Storage 101 video, one of our most watched, puts the OS on a small NVMe, VMs on an SSD, and a mirrored pair of hard drives behind them for bulk data. For that pair, buy CMR drives. Shingled (SMR) drives can slow to a crawl during a ZFS resilver, which is the moment you least want it.
The WD Red Plus 8TB (WD80EFPX) is CMR at 5,640 RPM with 256MB of cache, as the listing states. The Seagate IronWolf 8TB is the 7,200 RPM alternative: a little faster, a little louder and warmer. Either is fine in a two-bay NAS. Buy two of the same model and, if you can, from two different orders, so they don't share a batch. WD Red Plus 8TB on Amazon (check today's deal). Seagate IronWolf 8TB on Amazon (check today's deal).
A SATA SSD built for ZFS: the Kingston DC600M
It suits a ZFS mirror for VM disks on a host with SATA bays, where you want power loss protection. Consumer SSDs do work with ZFS, but they wear faster than people expect and most have no power loss protection. The videos on ZFS and consumer SSDs and Proxmox SSD wear cover the tuning side. The hardware side is buying a drive built for it.
Kingston's DC600M datasheet rates the 960GB model at 1,752 TBW, which is 1 drive write per day for five years, and the drive has on-board capacitors so it can finish in-flight writes when power drops. It is a 2.5-inch SATA drive, so it suits a tower, a used server or a NAS with SATA bays, not most mini PCs. More on why this matters in the enterprise drives and SSD wear post. Kingston DC600M 960GB on Amazon (check today's deal).
An NVMe drive with real endurance: the WD Red SN700
It suits mini PCs and NAS boxes with only M.2 slots, where an enterprise SATA drive won't fit. The SN700 is a PCIe 3.0 NVMe drive that Western Digital rates at 2,000 TBW for the 1TB model, with a five-year warranty. Tom's Hardware's review points out that the same-capacity WD Black SN750 is rated at 600 TBW, so you get more than three times the rated writes. PCIe 3.0 speed is plenty for a homelab VM pool. It has no power loss protection, so pair it with the UPS below. WD Red SN700 1TB on Amazon (check today's deal).
A UPS that Proxmox can read: the CyberPower CP1500PFCLCD
It suits any lab with ZFS pools, a NAS or more than one node, which is most of them. CyberPower's product page lists 1500VA / 1000W, line-interactive topology, sine wave output on battery and a USB port for monitoring. The USB port is the part that matters for Proxmox. Proxmox has no UPS screen, so you install Network UPS Tools (NUT) and let it shut the host down cleanly; the NUT setup video shows how. For a cluster, the shutdown order matters as much as the battery, which is covered in Proxmox UPS shutdown and cluster order.
One sizing rule from our UPS failure video: if your servers have two power supplies on two UPSes, the whole load must fit on one UPS. In that test rack, one old battery gave up and the other UPS was asked for 106% of its rating. Check the runtime chart against your real wall draw, and replace batteries on schedule.
Lead-acid UPS units often don't ship outside the US, so readers elsewhere may see "no featured offers" on this page. CyberPower CP1500PFCLCD on Amazon (check today's deal).
A 2.5GbE switch: the TP-Link TL-SG105-M2
It suits labs where the nodes and NAS already have 2.5GbE ports but the switch is still gigabit. The TL-SG105-M2 has five 2.5GbE ports, 25 Gbps of switching capacity, a fanless metal case and no setup, per the listing. With the EQ14 and DXP2800 above, every box in the lab gets 2.5GbE. It is unmanaged, so it can't do VLANs or LACP. If you want those, buy a managed switch instead and read the dual Ethernet video first. Also keep expectations right for Ceph: Proxmox recommends at least 10 Gbps for Ceph traffic, as covered in the Proxmox Ceph on 2.5GbE post. TP-Link TL-SG105-M2 on Amazon (check today's deal).
A watt meter: the P3 Kill A Watt P4400
Everyone should own one, and it is the cheapest item here. Powertop can't tell you real watts on a mains-powered mini PC; its own README says the estimates are built on battery. A plug-in meter can. Plug the node in, wait a few minutes after boot, and read the idle draw. Then change one BIOS or kernel setting at a time and read it again, as described in the idle power post. The same meter tells you the real load to size the UPS against. P3 Kill A Watt P4400 on Amazon (check today's deal).
What I would buy first
If you can only pick two things this week, take the UPS and the drives that fit your weakest link. A lab with a good UPS and NUT survives a power cut with its pools intact. A lab with worn consumer SSDs and no UPS is the one people write forum threads about. Faster networking and a second node can wait for next year's sale.
For the whole storage layout from scratch, start with the Ceph vs ZFS vs NAS guide, and if you are new to Proxmox, the book "Proxmox for Everyone" is on Amazon in Kindle and paperback.
Frequently Asked Questions
What is worth buying for a Proxmox homelab on Black Friday?
The parts that fail or limit you first: SSDs with a high endurance rating or power loss protection for ZFS, CMR hard drives for bulk storage, a UPS that Proxmox can read over USB with NUT, and a 2.5GbE switch if your nodes already have 2.5GbE ports. A small N100 or N150 mini PC is a good first node.
Should I use consumer SSDs with ZFS on Proxmox?
You can, but watch the wear figure. ZFS and the Proxmox cluster services write more than a desktop does. A drive with a high TBW rating, such as the WD Red SN700 1TB at 2,000 TBW, or a data center SATA SSD with power loss protection, such as the Kingston DC600M, lasts longer under that load.
What size UPS do I need for a Proxmox homelab?
Add up the real wall draw of everything on the UPS, then check the maker's runtime chart for that load. A 1500VA / 1000W unit such as the CyberPower CP1500PFCLCD covers a few mini PCs, a switch and a NAS with room to spare. If you run two UPSes for redundant power supplies, the whole load must fit on one of them.
Do I need a managed switch for 2.5GbE in a homelab?
Only if you want VLANs or link aggregation (LACP). An unmanaged 2.5GbE switch such as the TP-Link TL-SG105-M2 gives every port 2.5GbE with no setup. For VLANs on the switch side, buy a managed or smart model instead.